Gummiband-Boot

Submitted by Ramba on

Dieses Boot bewegt sich mit der durch rückwärts drehen des Schaufelrades, im Gummi gespeicherten Energie im Wasser vorwärts. Es kann mit verschiedenen Mengen und Stärken an Gummis experimentiert werden bis das beste Ergebnis erreicht ist. 

Material

  • 1s base plate 135x90x4mm
  • 2x side panels 230x30x10mm
  • 1x paddle wheel 75x30x4mm
  • 2x paddle wheel 35x30x4mm
  • 2x seat 30x30mm
  • 2x backrest 30x20mm
  • 1x privacy screen 30x60mm
  • 1x Bracket According to Template
  • Household rubbers Various types
  • 4 nails for the rubbers
  • Small nails for the boat deck

Building instructions

Saw out all the parts, sand and glue with waterproof glue and let it dry.

||

Hit the two nails in the specified place but pre-drill a little so that the wood does not tear.

||

Building the drive: Glue the three woods of the paddle wheel together as in the picture and let them dry well.

||

Tie the two household rubbers loosely around the nails as in the picture on the right and insert the paddle wheel. One side of each rubber should be facing each other.

Images

Construction plan (template)

The Rubber Band Boat in Action

Sources

El contenido puede estar traducido automáticamente. ¡Ayude a mejorar la calidad de la traducción con su edición!

Article available in: